If there is one thing that a pair of hands working with wood needs, it’s sturdy gloves. It is not a shocker that working with wood is a job where you are always at a risk of hurting your hands; hence the inescapable need for the best woodworking gloves arises.
Finding a pair of gloves that will not rip while working with wood is not as easy as it sounds. It took me months to find a few pairs that stayed intact even after continuous use.
I don’t want anyone to go through all that hassle, so I am sharing the 7 best woodworking gloves that I have found.
Our Top Picks For 2022
1. CLC Custom Leathercraft 125M Work Gloves – Best Gloves For Handling Wood
The CLC Custom Leathercraft 125M Work Gloves deliver exactly what they claim. Whether you take performance or construction, everything about this pair of gloves says high quality.
They have been manufactured with a blend of synthetic leather, Lycra, and Spandex that bring a multitude of benefits to the table, being on top of the list.
In addition to that, another perk of these gloves is that they are shrink-resistant so that you can wash them with ease.
Moreover, this perk also makes it possible to wear gloves in wet environments. The inner lining of the gloves is insulated, which will keep your hands snuggled at all times.
Furthermore, thanks to the addition of spandex, you will be able to work with wood efficiently while wearing these gloves.
A really nifty feature of these gloves is that the three middle fingers have a material sewn at the finger that makes it possible to use a touch screen.
If there is one thing a woodworker needs, it’s to wear a pair of gloves that won’t affect their jobs. This is what the CLC Custom Leathercraft 125M Work Gloves provides.
It has been manufactured with a blend of high-quality materials that bring many perks to the design. The three-finger touch screen design will allow users to tap on a screen and use it while wearing the gloves.
2. Mechanix Wear LFR-75-011 Gloves – Woodworking Safety Gloves
The first thing that you need to know about the Mechanix Wear LFR-75-011 Gloves is that they are constructed with the finest materials.
The blend of leather and rubber makes it possible to have a pair of gloves that will keep your hands safe and will stick around for some time.
The rubber used in manufacturing is thermoplastic, which means the gloves possess high strength. In addition to that, the thermoplastic rubber adds impact resistance to the design of these gloves, which is a game-changer.
Moreover, a layer of DuraHide is added to the palm of the gloves, which brings corrosion resistance to the table.
Furthermore, the design of these gloves is also quite nifty. The last two fingers are fully covered, but the thumb, index finger, and middle finger have a half-covered design.
The feature that I loved was that these gloves could be washed in a washing machine, so you can use them many times.
Mechanix Wear LFR-75-011 M-Pact Gloves come with some of the best features. First of all, they are impact-resistant, which means extra protection for your hands.
Moreover, the half-covered design of the gloves will make sure a woodworker can work easily while wearing the gloves.
3. Ironclad Framer Work Gloves – Best Gloves For Wood Cutting
The first thing that you need to know about these gloves is that they will keep your hands safe and snuggled.
These gloves are constructed from a combination of high-quality materials, each one of them bringing more to the design.
Firstly, the area over the knuckles is made of thermoplastic which adds impact resistance to the gloves.
In addition to that, the manufacturers have added layers of Duraclad material on the palm and thumb to improve the grip.
The best feature of these gloves is that they will provide protection to your hands without compromising their functionality.
They come with a half finger design for the thumb, and the rest of the fingers have a full finger design.
However, here comes an interesting part, the index finger and the middle finger have a small hole at the back, so if you wish to take your fingers out to pick up some material, you can do it without taking the gloves off.
Lastly, there is a cuff puller around the wrist that makes it possible to wear the Ironclad Framer Work Gloves in no time.
Get your hands on the Ironclad Framer Work Gloves if you want high protection for your hands without spending a ton of money.
These gloves come with a nifty design that provides protection while making sure your work performance doesn’t get affected.
4. Youngstown Glove 03-3110-80-L Carpenter Plus Gloves – Best Carpentry Gloves
The first thing that any woodworking gloves should have, their strength to withstand heavy usage.
In the case of the Youngstown Glove 03-3110-80-L Carpenter Plus Gloves, that strength comes from the high-quality material used in manufacturing.
These gloves are produced with neoprene that is highly durable and resistant to water.
In addition to that, these rubber gloves are also resistant to weather. The best part is that you can enjoy all of these perks without feeling a heavyweight on your hands, as these gloves are very light in weight.
To enhance the grip, the manufacturers have stitched non-slip fabric on the palm of the gloves.
The most common frustration while wearing gloves is not being able to grab small nails and screws. Youngstown has taken care of that too.
This product comes with three shortened fingers, the thumb, index finger, and middle finger. So that you can easily pick objects while keeping your hands safe.
The velcro stitched at the end will ensure that once you put the gloves on, they stay on your hand securely.
This model is the perfect fit for anyone who works with wood and nails all day. These gloves will provide safety to your hand without affecting the grip of your hand.
The water and weather-resistant construction of the gloves will make sure that you do not have to purchase another pair for a long time.
5. SHOWA 300L-09 Atlas Rubber Coated Gloves – Best Gloves For Carpentry
A strong pair of gloves that can handle the roughness of woodwork without ripping seemed impossible. However, it has been made possible, thanks to the SHOWA 300L-09 Atlas Rubber Coated Gloves.
These gloves may not seem very fancy, but their performance will leave you astounded.
First of all, they have been manufactured with the finest materials that includes rubber, polyester, and cotton. The blend of these materials adds many perks to the gloves.
Top of the list is protection, comfort, and a lightweight design. A lightweight design is needed when working with wood.
Moreover, these gloves can be washed in a machine without the worry of the gloves shrinking or getting damaged.
In addition to that, the 10 gauge liner and the rubber coating will enhance the durability and strength along with the grip of the gloves.
The Showa 300L-09 Atlas Rubber Coated Gloves are ideal for those who are looking for something simple. These are ideal pairs of gloves for woodworking as they will offer protection while keeping your hands snuggled.
Moreover, the machine-washable design makes it possible to re-use the gloves multiple times.
Having a pair of woodworking gloves is just as important as having the right size of hand saw. It keeps your hands safe and sound while you are working with hammers and screws.
The absence of woodworking gloves is a safety hazard.
However, similar to other tools and equipment, for optimum protection, you need the perfect pair of woodworking gloves.
The factors listed below will help you identify a pair of woodworking gloves that are suitable for all the hefty jobs that involve wood.
Construction Of The Gloves
This is the first and the most crucial factor that determines the longevity of the gloves. In addition to that, the construction and the material used in the construction also determine the amount of protection a pair of gloves can offer.
If a pair has been manufactured with low-quality material, it will not only endanger your hands but will also rip apart after a few uses. This will be a waste of money.
The ideal material for woodworking gloves is leather, rubber, thermoplastic, and polyester, etc. Each one of these materials possesses many perks such as strength, durability, water resistance, etc.
If you do not want to see your money go down the drain and your hands bruised, then it is crucial to check the construction of the gloves.
Along with the materials, make sure to also check the stitching of the gloves.
Design Of The Gloves
As a woodworker, you need to be working with small screws, nails, and other equipment, which may be difficult to do if you are wearing gloves.
After taking the gloves off, the functionality takes a boost, but protection diminishes. However, there is a way to keep both functionality and protection on the table.
There are some manufacturers that add a cut-off design to their gloves which involve the thumb and the index finger.
The thumb and the index finger only have a half-covered design, so you can use your finger to easily pick objects and use wood equipment.
Some designs of gloves only have the ring finger and the pinky finger fully covered, while the rest of the three are partially covered.
If you are going to be working with wooden tools all day, then you need a cut-off design.
These perks include water resistance, impact resistance, shrink resistance, and weather resistance, etc. These extra perks not only make it easier for you to use the gloves but also prolong the lifespan of the gloves.
So, when you are out there selecting a pair of woodworking gloves, make sure to buy a model that comes with bells and whistles.
As woodworking is a job that involves the usage of your hands, you can not wear a pair of gloves that weighs a ton. It will not only hinder your work performance, but it will also cause fatigue to your hands.
On the other hand, a lightweight design will keep your hands safe without causing any fatigue. This is why it is essential that you get yourself a pair of gloves that has a lightweight design.
What gloves are good for woodworking?
The CLC Custom Leathercraft 125M Work Gloves are ideal for woodworking. They come with construction that involves synthetic leather, spandex, and lycra.
These gloves are shrink resistant and come at a comparatively low price.
Should you wear gloves when using a circular saw?
Yes, it is essential to wear gloves when you are using a circular saw, as the gloves will keep your hands safe and protected from splinters.
In addition to that, it is also recommended to wear appropriate glasses while you are working with a circular saw.
Owning the right pair of woodworking gloves is just as important as having the right helmet. If it is too big or too small, it is useless for you, hence select a pair carefully.
All the models mentioned above are the best woodworking gloves that I have come across. I am also sharing my top 3 recommendations.
- CLC Custom Leathercraft 125M Work Gloves are shrink resistant, touch screen material, and come at a low cost.
- Mechanix Wear LFR-75-011 Gloves are impact resistant and corrosion resistant and have a half-covered design.
- Ironclad Framer Work Gloves are impact-resistant, have enhanced grip, and come at an affordable cost.
Here are some other interesting models that you might like:
- 【ENHANCED SAFETY】Made of HPPE blended with spandex, steel wire and nylon. Comply with ANSI cut resistance Level 6, provide industry grade hand...
- 【GOOD ABRASION RESISTANCE】Reinforced coating between thumb and index fingers offers extra endurance. Smart touchscreen design allows working with...
- 【FIRM GRIP & TACTILITY】Rough black sandy nitrile finish on palm and fingers guarantees excellent anti-slip performance when holding glass/pipes,...
- 【HIGHLY VERSATILE】Reusable cut resistant gloves for handling knife, concrete, metal, blade, glass and building material. Ideal for both heavy and...
- 【60-day Warranty and Size Tip】At OKIAAS, we center on customer satisfaction. Get your MACHINE-WASHABLE gloves today along with our 60-day...
- Cut resistant and heavy-duty: These work gloves have the highest cut protection rating available: CE EN388 Level 5. In other words, they protect your...
- Tough, durable and flexible: Made with a blend of stainless steel, high-performance polyethylene, glass fiber, and spandex, these lightweight gloves...
- Breathable and comfy all day. Wear your cut-resistant gloves as you work on quilting projects, spend time in your outdoor garden, whittle in the yard...
- Enjoy a better grip on everyday objects: Need to carefully move some glass? Want to make sure your hands don’t slip as you work on that wood chair?...
- Working gloves, for hard-working men and women: Wear these cut resistant gloves when you’re putting up sheet metal roofing, wood carving, whittling,...
- PATENTED ROLLTOP SEAMLESS FINGERTIPS - Provide ultimate dexterity and double layer protection. U.S. Patent No. 7,287,285
- REINFORCED FINGERNAIL GUARDS - Protects against chips & nicks
- HAND SAFETY - Neoprene knuckle feature provides impact and abrasion protection across the knuckles
- SWEAT MANAGEMENT FEATURE - Terry cloth sweat wipe conveniently located on the back of the thumb allows you to stay focused on the job at hand with one...
- MACHINE WASHABLE - Machine wash cool. Air drying is recommended in order to keep the size consistent with its original form from time of purchase
- Protect Your Hand From Cuts And Scrapes - These cut resistant gloves are made of Dyneema, resistant to cut, being 4 times stronger than leather....
- Easy To Maintain And Keep Clean - These protective gloves are hand and machine washable and can be sanitized as kitchen dish-washing towel.
- Convenient To Wear And Grip - flexible operation, Not too hard, No sliding. The special high elastic polyethene is blended to make the gloves fit your...
- Multiple Use - WISLIFE work gloves are perfect for slicing, oyster shucking and cutting for kitchen users, pumpkin/wood carving, carpentry, as well as...
- Food Grade And Breathable - Our cut work gloves meet food grade, and high performance polyethene makes these gloves for glass breathable, highly...
- Textured, breathable spandex shell with synthetic palm
- Reinforced thumb and finger saddle
- Ventilated cuff
- Wrist pull for easy on and off
- Spot wash by hand in luke warm water with mild detergent. Hang to dry do not use hot water. Do not put in dryer
- SHRINK RESISTANT: These work gloves are made with synthetic leather, providing toughness, and helps to resist shrinking/hardening. Excellent for...
- SOFT AND COMFORTABLE WORK GLOVES: Protect yourself against many jobs with these durable work gloves by CLC.
- FLEXIBLE SAFETY GLOVES: With stretchable spandex, Lycra side panels for improved dexterity, these work gloves will enable you to do the job without...
- WORK GLOVES THAT STAY ON: These work gloves feature an elastic cuff with strap to prevent work safety gloves from slipping off when they become wet
- WORK GLOVES FOR TOUGH JOBS: These CLC work gloves provide excellent protection for construction workers, mechanics, roofers, maintenance workers.